Interloop™ works with industry standard Two-Wire, Party-Line intercoms, connecting to the existing intercom system like any other belt pack. Using Bluetooth Wireless Technology, Interloop™ allows wireless connection to a variety of audio devices. A rear panel switch selects Headset or Phone connection. Headset mode allows you to connect to a Bluetooth enabled headset for wireless freedom. Phone mode allows you to connect to a wireless phone to let others join in, or connect to a notebook or laptop to provide remote voice access using communications applications such as Skype™.
| Featured Products | |
| IL | Interloop |
| OL | Outerloop |
| 3.5 | Outerloop 3.5 |
| Features | IL | OL | 3.5 |
| HD Voice Compatible (7 kHz Wide-Band Speech) | |||
| Connects to Headsets, Phones, & Notebooks with Bluetooth Wireless Technology | |||
| Connects to Phones and Notebooks with 4-conductor 3.5mm Headset Interface | |||
| 2.4 GHz Encrypted Digital Wireless | |||
| 3-pin XLR Male and Female Intercom Jacks | |||
| 4-pin and 5-pin Male or Female Headset Jacks | |||
| Send and Receive Volume Controls | |||
| Push-On, Push-Off Talk Button | |||
| Recessed Sidetone Level control | |||
| Intercom Powered with 9 Volt Battery Backup | |||
| Number of hours on one 9 Volt Battery | N/A | 10hr | >20hr |
| Made in America | |||
| Approved for Sale in Europe and Australia |
Powered by the intercom system, yet uses less current than a typical belt pack. Includes 9 VDC battery backup, holding the wireless connection while changing cables.
While Interloop™ will work with any Bluetooth enabled headset, most headsets were designed to work a short distance from the phone. JK Audio Outerloop and BlueSet offer increased range and performance making it the perfect match.
| Tech Reports | |
| HD Voice Primer | |
| Wireless Phone Compatibility | |
| About Bluetooth Wireless Technology | |
| Downloads | |
| Datasheet (148 kb) | |
| User Guide (522 kb) | |
| Specifications | |
| Intercom Channel | Male & Female 3-pin XLR |
| Output Level | 0 dBu ( 775 mV ) nominal |
| Terminating Impedance | 200 ohms |
| Bridging Impedance | >15k ohms |
| Pin 1 | Common |
| Pin 2 | 30 VDC ( +12 VDC min ) 35 mA |
| Pin 3 | Audio |
| Bluetooth Wireless Technology | |
| Standard | Bluetooth 3.0 |
| Profile | Hands Free (HF) |
| Distance | 66 ft (20 m) |
| Frequency Response | Hands-Free (Full Duplex): 300 Hz– 3.4 kHz Hands-Free (Full Duplex HD): 50 Hz– 7 kHz |
| Misc | |
| Power | Intercom System with 9 VDC Battery Backup |
| Size | 4.7” x 3.75” x 1.65” (12 x 9.5 x 4.2 cm) |
| Weight | 10 oz (275 g) |
Contact us at 1-815-786-2929