RemoteAmp Two

Stereo Headphone Amplifier

JK Audio RemoteAmp Two Front

Mono IFB Plus Stereo Audio Input.

RemoteAmp Two provides a listen only connection for mono IFB or full bandwidth stereo music listening. Separate volume controls for the XLR and 3.5 mm line input jacks allow a simple mix of mono and stereo sources. The XLR line level input accepts either a balanced mono signal, or a party line intercom feed (listen-only). The ½ watt, ¼” stereo headphone jack will cut through any crowd noise. Connect an IFB earpiece to the 3.5 mm earpiece jack for mono operation.

Learn More Details Specs

Product Details

Features RA R2
Compatible with TW (Two-Wire) Party-Line Intercoms (Listen-Only)
XLR Line level Input
1/8" (3.5mm) Stereo Line Input Jack
1 Master Level Control
2 Independent Level Controls
Hi-Z/Lo-Z Termination of 3.5mm Input
1/4" Stereo Headphone Jack
1/8" (3.5mm) Stereo Headphone Jack
Stainless Steel Belt Clip
>20 Hours on one 9V Battery
Made in America
Approved for Sale in Europe and Australia
JK Audio RemoteAmp Two Back


Line Input Female XLR 1/8" (3.5mm) Line In
Impedance 4k ohms 20k ohms; Switchable to 50 ohms
Level 100 mV RMS
(-18 dBu nom, +12 dBu max)
-10 dBu nom.
Headphones 1/4" Stereo 1/8" (3.5mm) Stereo
Impedance 8 ohms 10 ohms
Level 500 mW per channel 430 mW per channel
Stereo Separation 55 dB
Frequency Response 20 Hz - 20 kHz
Power One 9 volt Alkaline Battery
Size 5.1" x 2.7" x 1.3" (13 x 6.9 x 3.3 cm)
Weight 10 oz. (275 g)