BlueDriver-F3

Wireless Audio Interface
JK Audio BlueDriver-F3

Mic/Mixer Output to your Bluetooth Device.

Pair to your Bluetooth enabled cell phone or headset to send audio to your Bluetooth device. The 3.5 mm stereo jack contains a mic level output suitable for recording, with the clean mic signal on the left channel and the Bluetooth return on the right.

Learn More Details Specs

BlueDriver-M3

Wireless Audio Interface
JK Audio BlueDriver-M3

Bluetooth Device to Mic Input.

Pair to your Bluetooth equipped cell phone or headset to get audio straight from your Bluetooth device into your Mic input. The 3.5 mm send jack will accept a signal from the headphone output of the mixer for transmission back to the cell phone or headset.

Learn More Details Specs

Product Details

Features D3 F3 M3
HD Voice Compatible (7 kHz Wide-Band Speech)
3-pin Female XLR Input
3-pin Male XLR Output
3.5 mm Input
3.5 mm Output
Trim Pot Adjusts Mic Level
Headset/Phone Switch
Mini USB Power Jack
> 18 Hours on one 9-volt Alkaline Battery
>10 hours on Internal Li-Ion Battery
Made in America
Approved for Sale in Europe and Australia

Headset Mode vs. Phone Mode

A switch on either unit selects between connection to a 3rd party Bluetooth headset, or a cell phone.

Headset Connect

Pair BlueDriver™ to your 3rd party Bluetooth headset. Some Bluetooth headsets allow you to switch between your audio device and a cell phone.

Phone Connect

Pair BlueDriver™ to your cell phone to call into the station or bring in caller audio.

Specs

Specifications BlueDriver-F3 BlueDriver-M3
Input 3-pin Female XLR 1/8" (3.5mm) Stereo
Impedance 1k ohms 20k ohms
Level -34 dBu nom. -10 dBu nom.
Output 1/8" (3.5mm) Stereo 3-pin Male XLR
Impedance 1.1k ohms 1k ohms
Level -34 dBu nom. -34 dBu nom.
Bluetooth Wireless Technology
Standard 3.0
Profile Hands-Free (HF): full duplex voice, 300Hz – 3400Hz
HF (HD Voice): 50 Hz - 7 kHz
A2DP: 30Hz – 17 kHz, master to slave
Frequency Response End-to-End Latency = 150 ms under Bluetooth A2DP Profiles.
Range 66 ft (20 m)
Misc.
Battery Internal Lithium-Ion Polymer Rechargeable
Power 120-240 VAC power supply (included)
Size 1.1” x 4.4” (2.8 cm x 11.2 cm)
Weight 9 oz. (250 g)
*HD Voice: While standard phone calls have a narrow bandwidth of 300 Hz to 3.4 kHz, HD Voice calls offer 50 Hz to 7 kHz bandwidth. The additional 1.5 octaves on the low end gives voice a more natural sound, while the additional upper octave dramatically improves speech clarity and intelligibility.

*Wireless HD Calls: To take advantage of this extended bandwidth, both phones on the call must support HD Voice, and both phones must be on the same carrier, in coverage areas that support HD Voice.