| RemoteMix C+
Portable Remote Mixer
Overview | Details
| FAQs | Downloads
| Dealers
Two XLR Microphone Inputs with independent level controls. Mic 1 input is mic/line switchable.
Two 1/4" Headphone Jacks adjustable with "Headphones" control.
RCA Line Input accepts line level signals. Adjustable with the "Line In" control.
RCA Line Output delivers a line level signal containing the phone + mic mix. Adjustable
to mic level with the "Line Out" control.
Balanced XLR Output delivers a line level signal containing the phone + mic mix. Adjustable
to mic level with the "Line Out" control.
RJ-11 Jack for use with conventional phone lines. Also has an auxiliary handset input for
use as a standard telephone. Handset jack is biased for electret microphone types.
Time Delayed Peak Limiter and VU Meter help to control transmit levels. The peak limiter
has a three second delay before clipping and audio. This allows for normal speech patterns
as well as brief exclamations to be broadcast unhindered.
|
Specifications
|
Inputs: |
|
Microphone: |
Female XLR (2), 1k ohms, -10 mV RMS (-35
dBm nom.) Mic 1 has a Mic / Line pad switch, Line = +5 dBm nominal |
Line in: |
RCA 20k ohms, 250 mV RMS (-10 dBm nom.)
|
Outputs: |
|
Line out: |
RCA 50 ohms, 250 mV RMS (+5 dBm max.) |
Balanced out: |
Male XLR, 200 ohms, 500 mV RMS (+12 dBm
Max.) |
Headphones: |
1/4" Stereo (2), 8 ohms, 1/2 watt per
channel |
|
| Two 9 Volt Batteries will power the unit for 36 hours. The batteries are installed
parallel so the unit can run on only one battery if necessary. An AC adapter is also
included with the unit.
DTMF/Pulse Keypad for dialing out. Tone/Pulse switch located under the battery door.
|
Phone line: |
RJ11C, Isolation 1500 VAC |
Ringer: |
1.2B REN |
Keypad: |
DTMF (Dual Tone Multi Frequency) / Pulse
dial
Switch located under battery door.Auxiliary Handset Jack, biased for electret microphone
type handset. |
Size: |
6.5 x 4.6 x 2.2 inch (16.5 x 11.7 x 5.6
cm) |
| Weight: |
1.8 Pounds |
|
