Below you'll find our Frequently Asked Questions for this product. If you have a question
that you don't see answered here, please email your question to support@jkaudio.com
or call 1-800-552-8346.
? |
What is the range of the Bluetooth receiver? |
! |
RemoteAmp Blue will receive audio signals up to 25 feet from your Bluetooth device. Battery power is consumed faster as transmission distance increases. Whenever possible, keep RemoteAmp Blue close to your Bluetooth device to conserve battery power. |
| |
|
? |
Can I connect a microphone to the XLR input jack? |
! |
No, this input is line level only. You need to connect your mic to a mixer or pre amp first. |
| |
|
? |
Can I mix sound clips from my personal audio player with the audio from my console? |
! |
Yes, you can use both the balanced XLR and unbalanced 3.5 mm inputs simultaneously. The Stereo Line In allows music or other recordings to be mixed in with the audio from your console and from your cell phone (or laptop) Bluetooth connection. |
| |
|
? |
Can I connect this to my intercom unit? |
! |
Yes, this headphone amplifier works well when connected to a ClearCom, RTS or Telex 3-pin XLR party line intercom link so you can monitor the feed, even while listening to the 3.5 mm stereo input. |
| |
|
? |
How long will the battery last? |
! |
Based on our tests using a standard alkaline battery, with RemoteAmp Blue about 1 meter from a Bluetooth device the battery should last for about 10 hours under normal use. Lithium batteries can significantly increase the battery life, but at a higher cost. As an indicator of low battery, the red power LED will grow dim and then extinguish a short while before the battery is completely exhausted and the unit shuts down. |
| |
|
? |
Can I pair my RemoteAmp Blue to two cell phones and receive audio from two locations simultaneously? |
! |
No, your RemoteAmp Blue can only be paired to one Bluetooth enabled device at a time. |
Now approved for sale in Europe and Australia!