| RemoteAmp Two
Stereo Headphone Amplifier
Overview | Details
| FAQs | Downloads |
Dealers
Below you'll find our Frequently Asked Questions for this product. If you have a question
that you don't see answered here, please email your question to support@jkaudio.com
or call 1-800-552-8346.
? |
Can I connect a microphone to the XLR input jack? |
! |
No, this input is line level only. You need to connect your mic to a mixer or pre amp first. |
| |
|
? |
Can I mix sound clips from my personal audio player with the audio from my console? |
! |
Yes, you can use both the balanced XLR and unbalanced 3.5 mm inputs simultaneously. The Stereo Line In allows music or other recordings to be mixed in with the audio from your console. |
| |
|
? |
Can I connect this to my intercom unit? |
! |
Yes, this headphone amplifier works well when connected to a ClearCom, RTS or Telex 3-pin XLR party line intercom link so you can monitor the feed, even while listening to the 3.5 mm stereo input. |
| |
|
? |
How long will the battery last? |
! |
Based on our tests using a standard alkaline battery with the RemoteAmp Two, the battery should last for about 20 hours under normal use. Lithium batteries can significantly increase the battery life, but at a higher cost. As an indicator of low battery, the red power LED will grow dim and then extinguish a short while before the battery is completely exhausted and the unit shuts down. |
|
 Now approved for sale in Europe and Australia!
|
|
