Below you'll find our Frequently Asked Questions for this product. If you have a question
that you don't see answered here, please email your question to support@jkaudio.com
or call 1-800-552-8346.
? |
What kind of earpiece should I look for to use with the QuickTap IFB? |
! |
Any standard earpiece should work fine as long as it has an impedance
greater than 600 ohms. |
| |
|
? |
I want to send the QuickTap IFB's XLR output to an auxiliary input
of my mixer but I'm not getting any audio. What's wrong? |
! |
The QuickTap IFB is a passive device that outputs a mic level signal.
You'll need to send the output to a mic input on your mixer. |
| |
|
? |
How do I adjust the level of the XLR output on my QuickTap IFB? |
! |
The attenuator on the QuickTap IFB only adjusts the 1/8" earpiece jack.
The male XLR provides a fixed level 600 ohm output. |
| |
|
? |
I'd like to use a pair of headphones with my QuickTap IFB. Is this
possible. |
! |
The QuickTap IFB is a passive device and will not power a pair of headphones
by itself. You'll need to get a JK Audio RemoteAmp to go along with it. The RemoteAmp
will take the balanced output from the QuickTap IFB, amplify it and send it to a 1/4"
headphone jack and a 3.5 mm jack. |
